Rigol’s M300 Series data acquisition and switch system provides accurate, repeatable measurements with industry leading total system cost optimized for general purpose temperature, resistance, and voltage scanning with a breadth of modules to handle all of your DAQ system requirements.
The reference M300, 5 slots available, is only for switching application, M301 include the Multimeter MC3065 and the M302 include the Multimeter MC3065 associated to the Multiplexer MC3120
| M300 - 5 slots mainframe Mainframe |
|
| M302 - 5 slots mainframe with DMM MC3065 and MC3120 Mainframe |
|
 |
MC3120 - 20-channel multiplexer ·All 20 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB20 terminal block |
 |
MC3132 - 32-channel multiplexer ·All 32 channels switch both HI and LO inputs ·Support 4-wire measurement ·The signal to be tested is connected through the M3TB32 terminal block |
 |
MC3164 - 64-channel single-ended multiplexer ·All 64 channels can switch HI input only ·Doesn't support 4-wire measurement ·The signal to be tested is connected through the M3TB64 terminal block ·Can be connected |
 |
MC3324 - Mixed multiplexer with 20 voltage channels and 4 current channels ·All 20 voltage channels switch both HI and LO inputs ·20 voltage channels support 4-wire measurement ·4 current channels are used to measure DC current or AC current ·The signal to be tested is connected through the M3TB24 terminal block |
 |
MC3416 - 16-channel actuator ·Can connect signal to the device under test or enable external device ·Any of the 16 channels can switch to Normally-Open (NO) and Normally-Closed (NC) states ·The signal is connected through the M3TB16 terminal block |
 |
MC3534 - Multifunction module ·DIO: four 8-bit digital input/output ports ·TOT: four totalizer input terminals ·DAC: four analog output terminals ·The signal is connected through the M3TB34 terminal block |
 |
MC3648 - 4×8 two-wire matrix switch ·Used to connect multiple devices to multiple points on the device under test ·32 two-wire cross points which can connect any combination of inputs and outputs at the same time ·The signal is connected through the M3TB48 terminal block |
 |
RM-1-M300 - Rack Mount for 1 M300 M300 |
| |
RM-2-M300 - Rack Mount for 2 M300 Systems M300 |
 |
M3A2B - Analog bus to banana jack cable M300 |
 |
M3GPIBCONNECTOR - GPIB Reverse connection adaptor M300 |
 |
Ultra Acquire Pro - Ultra Acquire Pro Software M300 |
| M301 | Data Acquisition Mainframe with DMM Module |
| M300 | 5 slots mainframe |
| M302 | 5 slots mainframe with DMM MC3065 and MC3120 |
| MC3120. | 20-channel multiplexer |
| MC3132. | 32-channel multiplexer |
| MC3164. | 64-channel single-ended multiplexer |
| MC3324. | Mixed multiplexer with 20 voltage channels and 4 current channels |
| MC3416. | 16-channel actuator |
| MC3534. | Multifunction module |
| MC3648. | 4×8 two-wire matrix switch |
| RM-1-M300 | Rack Mount for 1 M300 |
| RM-2-M300 | Rack Mount for 2 M300 Systems |
| M3A2B | Analog bus to banana jack cable |
| M3GPIBCONNECTOR | GPIB Reverse connection adaptor |
| Ultra Acquire Pro | Ultra Acquire Pro Software |