FemtoScope - 5 or 16 GHz USB Wide-Bandwidth Oscilloscopes

Main features

1, 2 or 4 channels configuration.
5 or 16 GHz USB oscilloscope bandwidths available to match your measurement application,
1.5 ps rms typical intrinsic jitter.
12-bit Analog-to-Digital Converter with 500 MSa/s real time sampling rate per channel.
Equivalent time sampling rate up to 5 TSa/s.
10 ps/div fastest time base scale.
Up to 16 GHz trigger bandwidth enables capture and analysis wide-bandwidth complex signals.
Up to 11.3 Gb/s clock recovery trigger data rate.
Powerful SW and flexible, simple and intuitive user interface with built-in OnLine Help and demo training signals.
Color graded display, automatic measurements, eye diagrams, mask test, histograms, waveform mathematics, 7-digit built-in frequency counter, spectrum analysis with FFT, autoscale, store waveforms and setups.
Power consumption less than 15 or 22 W.

Options

Clear

The FemtoScope 1000, 2000 and 3000 series are portable and low cost digital storage oscilloscopes having bandwidth up to 5 or up to 16 GHz. These oscilloscopes are designed for engineers working both in research laboratories and in production workshops, and who, above all, need characteristics associated with flexible measurements of wide-bandwidth single-shot or repetitive signals.

More recently, if you needed an oscilloscope with a bandwidth of more than 5 GHz, you had to accept the need for significant financial costs. The FemtoScope models set a new price/performance ratio standard for gigahertz frequency USB oscilloscopes.

These single-, dual- or four-channel instruments, having a bandwidth of 5 or 16 GHz and triggering over the entire frequency range, provide the acquisition, display, measurement and analysis of complex waveforms in the range from picoseconds to hundreds of seconds.

Being a direct alternative to traditional benchtop oscilloscopes, these instruments are portable, and maybe even miniature, and, what is extremely important, they have an incomparably lower cost. Economical prices make the FemtoScope Series preferred for teaching basic scientific and engineering measurements at lab stations in schools and universities. Features normally only found on much higher priced scopes equip the FemtoScope Series to be a powerful choice for R&D applications.

	FS1051 - 1 Channel, BW 5GHz, 500MS/s, 1ps Timing resolution Sampling oscilloscopes
	FS1161 - 1 Channel, BW 16GHz, 500MS/s, 0.2ps Timing resolution Sampling oscilloscopes
	FS2052 - 2 Channels, BW 5GHz, 500MS/s, 1ps Timing resolution Sampling oscilloscopes
	FS2162 - 2 Channels, BW 16GHz, 500MS/s, 0.2ps Timing resolution Sampling oscilloscopes
	FS3054 - 4 Channels, BW 5GHz, 500MS/s, 1ps Timing resolution Sampling oscilloscopes
	FS3164 - 4 Channels, BW 16GHz, 500MS/s, 0.2ps Timing resolution Sampling oscilloscopes

FemtoScope	5 or 16 GHz USB Wide-Bandwidth Oscilloscopes
FS1051	1 Channel, BW 5GHz, 500MS/s, 1ps Timing resolution
FS1161	1 Channel, BW 16GHz, 500MS/s, 0.2ps Timing resolution
FS2052	2 Channels, BW 5GHz, 500MS/s, 1ps Timing resolution
FS2162	2 Channels, BW 16GHz, 500MS/s, 0.2ps Timing resolution
FS3054	4 Channels, BW 5GHz, 500MS/s, 1ps Timing resolution
FS3164	4 Channels, BW 16GHz, 500MS/s, 0.2ps Timing resolution

Receive the document immediately by E-mail

Name

E-mail *

The information collected via this form is registered by our company to allow us to respond to your request, to follow the exchanges between you and our company, to respond to your specific request for documentation download. We can therefore be led to contact you by mail or phone to ensure the adequacy of our service with your request or to complete it. Your data are kept for 3 years and are intended for our customer service. In accordance with the law "IT and freedoms", you can exercise your right of access to your data and have them rectified by contacting us as stipulated in our page presenting our privacy policy.

	SI-9002 - Oscilloscope Differential probe The Differential probe SI-9002 extends the measurement power of oscilloscopes to power semiconductor circuits. This Differential Probe provides any general oscilloscope with a high voltage differential input.
	TP-ACC20 - Accelerometer The Accelerometer TP-ACC20 is a dual axis accelerometer combined with a manual trigger button, designed to be used with the Handyscope HS3, Handyscope HS4, Handyscope HS4 DIFF (order ...
	TP-C1812B - Measure lead The Measure lead TP-C1812B is a low noise differential measure lead designed to be used with the Handyscope HS6 DIFF, Handyscope HS4 DIFF. This 2 meter long measure ...
	TP-C812B - Measure lead The Measure lead TP-C812B is a low noise differential measure lead designed to be used with the Handyscope HS6 DIFF, Handyscope HS4 DIFF. This 2 meter long measure ...
	TP-CC400 - Current Clamp The Current clamp TP-CC400 is a current clamp that will allow your measuring instrument to measure electrical currents up to 400 A AC/DC, with a frequency response up ...
	TP-CC600 - Current Clamp The Current clamp TP-CC400 is a current clamp that will allow your measuring instrument to measure electrical currents up to 600 A AC/DC, with a frequency response up ...
	TP-CC80 - Current Clamp The Current clamp TP-CC80 is a current clamp that will allow your measuring instrument to measure electrical currents up to 80 A AC/DC, with a frequency response up ...
	TP-DA10 - Differential attenuator The Differential attenuator TP-DA10 is a differential 1:10 attenuator, specially designed to be used with the Handyscope HS6 DIFF. Due to the differential inputs of these instruments, a ...